Adding On-Screen Instructions; Using Marquee Text; Using Screen Saver Text - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System

Adding On-screen Instructions

Using Marquee Text

Using Screen Saver Text

4 - 20
You can create marquee text to display in the dialing entry field on the home
screen. You can create context-specific instructions or, if the home screen has Site
buttons, the marquee text can provide information that helps other users choose
which site to call.
To enter marquee text:
1. Go to System > Admin Settings > General Settings > Home Screen Settings.
2. In Dialing Display, select Display Marquee and enter the text.
You can also add marquee text through the V500 web interface.
You can customize the V500 system to display text when the system is in sleep
mode. For instance, you can display on-screen instructions.
To enter screen saver text:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address (for example,
http://255.255.255.255) to go to the V500 web interface.
Enter your user name and the password, if a password has been established.
3.
4. Click System Setup > Utilities > Screen Saver and enter:
• Text — Appears as scrolling text when the system is in sleep mode. You
can use this scrolling text to provide instructions or next steps for users of
the system.
• Logo Text — Appears underneath the logo before the system goes into
sleep mode.
5. Click Update.
www.polycom.com/videodocumentation