Polycom V500 Administrator's Manual page 92

Administrator's Guide for the V500 System
Reset and Restart
Diagnostic Tool
Reset System
• Cycles power to the system.
• Allows you to keep your system settings
(such as system name and network
configuration) or restore factory
settings.
• Allows you to keep or delete the
directory stored on the system.
Restart System
Cycles power to the system.
7 - 6
In the system's user interface
1. On the Diagnostics screen,
select Reset System.
2. Enter the system's serial
number.
3. If you wish to restore the
original factory settings, select
Delete System Settings.
This deletes the
administrator's password,
CDR, and CDR archive along
with the other system settings.
You may wish to download the
CDR and CDR archive before
you reset the system. See
Detail Report on page
you delete system settings,
the setup wizard will lead you
through the initial
configuration after the system
restarts.
4. If you wish to remove the
directory, select Delete
Directory Entries.
This only deletes the system's
local directory. System reset
does not affect the Global
Directory.
5. Select Reset System.
Use the power switch on the
system.
In the V500 web interface
Not available.
Call
6-6. If
1. Select Diagnostics > Reset
System.
2. Click the Reset System icon.
www.polycom.com/videodocumentation