Indicators; System Lights; Network Interface Lights - Polycom V500 Administrator's Manual

Indicators

System Lights

Network Interface Lights

© Polycom, Inc.
The V500 system uses indicator lights to provide status information. The following
tables give the meanings of each indicator.
The system lights are located on the front of the V500 system.
When the V500 system...
Indicators are off
Green indicator blinks slowly
Green indicator flashes when you
use the remote control
Amber indicator flashes when you
use the remote control
Green indicator is on
Amber indicator is on
Red indicator is on.
The BRI network interface lights are located on the back of the system near the BRI
connector.
When the BRI network interface...
Indicators are off
Green indicator is on
Yellow indicator is on
Green and yellow indicators are on
Chapter 7 - Diagnostics and General Troubleshooting
It means...
No power to the system.
The system is sleeping.
The system is not in a call, and is receiving
signals from the remote control.
The system is in a call, and is receiving signals
from the remote control.
The system is ready to make a call.
The system is in a call.
The system microphone is muted.
It means...
• No power to the system, or
• The system is not connected to the network, or
• The system is not receiving a clock signal from
the network, or
• The system is restarting.
The system is receiving a clock signal from the
network.
The system is able to make a call.
• The system is receiving a software update, or
• The system is operating normally.
7 - 7