Setting Date, Time, And Location - Polycom V500 Administrator's Manual

Setting Date, Time, and Location

© Polycom, Inc.
You can update the system with regional settings, including the location-specific
language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
Setting
Country
Language
Country Code
Area Code Required
ISDN International
Access
Room Telephone
Number
3. Select and configure these settings:
Setting
Date Format and
Time Format
Daylight Saving Time
Time Difference from
GMT
Display Time in Call
Time Server
Description
Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Sets the language for the user interface.
Specifies the country code for the system location.
Specifies if an area code is required to place ISDN calls in the
specified country.
Specifies the international code required for placing ISDN calls
from the system location to another country.
Indicates the telephone number of the room where the system is
located.
Description
Specifies your format preference for the date and time display
and lets you enter your local date and time.
Specifies whether it is daylight saving time.
Specifies the time difference between GMT (Greenwich Mean
Time) and your location.
Specifies the time display in a call:
• Elapsed Time – Displays the amount of time in the call.
• Local Time – Displays the local time on the screen during a
call.
• Off – Time is not displayed.
Specifies connection to a time server for automatic system time
settings.
Chapter 4 - Designing the User Experience
4 - 15