Configuring For Snmp Management - Polycom V500 Administrator's Manual

Configuring for SNMP Management

© Polycom, Inc.
To configure the V500 system for SNMP management:
1. In the V500 web interface or from the V500 system, go to Admin Settings >
Global Services > SNMP.
2. Configure these settings:
Setting
Enable SNMP
SNMP Community
SNMP Contact
Name
SNMP Location
Name
SNMP System
Description
SNMP Console IP
Address
Description
Allows administrators to manage the system remotely using
SNMP.
Specifies the SNMP management community in which you want
to enable this system. The default community is public.
Specifies the name of the person responsible for remote
management of this system.
Specifies the location of the system. The default is
your system name@your country name.
Specifies the type of video conferencing device. This is a
display-only field.
Specifies the IP address of the SNMP traps sent by the system.
Enter 0.0.0.0 in this field if any SNMP management console
is capable of receiving information from this agent.
Chapter 5 - Managing the System Remotely
5 - 9