Changing System Appearance; Setting Ring Tones And Alert Tones - Polycom V500 Administrator's Manual

Changing System Appearance

Setting Ring Tones and Alert Tones

© Polycom, Inc.
Different user interface color schemes are available, allowing you to coordinate the
system interface with the room décor.
To change the color scheme:
1. Go to System > Admin Settings > General Settings > System Settings >
Appearance.
2. Configure these settings:
Setting
Color Scheme
Screen Saver Wait
Time
You can allow users to change color schemes by allowing user access to the User
Settings screen.
To set ring tones and alert tones:
1. Go to System > Admin Settings > Audio.
2. Select a tone, as desired.
To set the V500 system's internal ringer:
1. Go to System > Admin Settings > Audio.
2. Select Enable Internal Ringer to specify an additional ring tone when
receiving an incoming call.
The ringer is built into the system and will alert you to incoming calls even if the TV
monitor connected to the system is powered off.
Description
Customizes the look of your system with different color schemes.
Specifies how long the system remains awake during periods of
inactivity. The default is 3 minutes.
Chapter 4 - Designing the User Experience
4 - 21