Screens That Require The Admin Password For Access - Polycom V500 Administrator's Manual

Screens that Require the Admin Password for Access

Admin Settings
General Settings Network
System Settings
Home Screen Settings
Security
Location
IP
ISDN
Call Preference
Recent Calls
© Polycom, Inc.
To reset a forgotten Admin Password:
1. Get the system's serial number from the system or from the System
Information screen.
2. Go to System >Diagnostics > Reset System.
3. Enter the system's serial number and select Delete System Settings.
4. Select Reset System.
When the system completes the reset, it leads you through the setup wizard. You
can enter a new Admin Password when you set up the system.
The following diagram shows top-level system screens. All screens within Admin
Settings require the administrator's password.
Diagnostics
Monitor Camera
H.323 Settings
SIP Settings
Quality of Service
Firewall
System Information
Audio
Chapter 4 - Designing the User Experience
Utilities
User Settings
LAN Properties Global Services
Directory Servers
Dialing Rules
SNMP
Management Servers
Account Validation
My Information
4 - 3