Designing General System Behaviors; Configuring Call Settings - Polycom V500 Administrator's Manual

Designing General System Behaviors

Configuring Call Settings

© Polycom, Inc.
You can configure the following general system behaviors to accommodate the
needs of your organization:
Call Settings
Remote Control Behavior
Directory Settings
Call Answering Mode
AES Encryption
Passwords and Security Options
Date, Time, and System Location
The Call Settings screens provide access to high-level options for the entire system.
For convenience, some of the User Settings options are repeated on these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings > Call
Settings.
2. Configure these settings:
Setting
Maximum Time in
Call
Auto-Answer Point
to Point
Display Time in Call
Call Detail Report
Description
Enter the maximum number of minutes allowed for call length.
When that time has expired, you see a message asking you if you
want to hang up or stay in the call. If you do not answer within one
minute, the call automatically disconnects. If you choose to stay
in the call at this time, you will not be prompted again.
Specifies whether to answer incoming point-to-point calls
automatically.
Specifies whether to display the elapsed time or the local time
during a call. You can also choose not to display the time.
Specifies whether to generate a report of all calls made with the
system. When selected, details for all calls can be viewed via the
V500 web interface and downloaded as a .csv file.
Chapter 4 - Designing the User Experience
4 - 11