Polycom V500 Administrator's Manual page 84

Hide thumbs Also See for V500:
Table of Contents

Advertisement

Administrator's Guide for the V500 System
6 - 8
Data
Description
Disconnect
The description of the Q.850 (ISDN) cause code showing how the
Reason
call ended.
Q.850 Cause
The Q.850 cause code showing how the call ended.
Code
Total H.320 Errors
The number of errors during an H.320 call.
Average Percent of
The combined average of the percentage of both audio and video
Packet Loss (Tx)
packets transmitted that were lost during the 5 seconds preceding
the moment at which a sample was taken. This value does not
report a cumulative average for the entire H.323 call. However, it
does report an average of the sampled values.
Average Percent of
The combined average of the percentage of both audio and video
Packet Loss (Rx)
packets received that were lost during the 5 seconds preceding the
moment at which a sample was taken. This value does not report
a cumulative average for the entire H.323 call. However, it does
report an average of the sampled values.
Average Packets
The number of packets transmitted that were lost during an H.323
Lost (Tx)
call.
Average Packets
The number of packets from the far site that were lost during an
Lost (Rx)
H.323 call.
Average Latency
The average latency of packets transmitted during an H.323 call
(Tx)
based on round-trip delay, calculated from sample tests done once
per minute.
Average Latency
The average latency of packets received during an H.323 call
(Rx)
based on round-trip delay, calculated from sample tests done once
per minute.
Maximum Latency
The maximum latency for packets transmitted during an H.323 call
(Tx)
based on round-trip delay, calculated from sample tests done once
per minute.
Maximum Latency
The maximum latency for packets received during an H.323 call
(Rx)
based on round-trip delay, calculated from sample tests done once
per minute.
Average Jitter (Tx)
The average jitter of packets transmitted during an H.323 call,
calculated from sample tests done once per minute.
Average Jitter (Rx)
The average jitter of packets received during an H.323 call,
calculated from sample tests done once per minute.
Maximum Jitter
The maximum jitter of packets transmitted during an H.323 call,
(Tx)
calculated from sample tests done once per minute.
Maximum Jitter
The maximum jitter of packets received during an H.323 call,
(Rx)
calculated from sample tests done once per minute.
www.polycom.com/videodocumentation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V500 and is the answer not in the manual?

Questions and answers

Table of Contents