Thermal Sensor Submenu; Wake On Events Submenu; Console Redirection Submenu - NEC EXPRESS5800/140Hb Service Manual

Thermal Sensor Submenu

Feature
Thermal Sensor
Upper Limit
Lower Limit

Wake On Events Submenu

Feature
Wake On LAN
Wake On Ring

Console Redirection Submenu

Feature
Serial Port Address
Baud Rate
Flow Control
Console
Connection
3-16 Configuring Your System
Choices or
Display Only Description
Enabled
When enabled determines if
Disabled the BIOS will disable boot (if
temperature is not within a
safe range).
55 (11 to 80) Sets the upper temperature
limit in Celsius.
3 (0 to 69)
Sets the lower temperature
limit in Celsius.
Choices or
Display Only Description
Enabled Enables Wake ON LAN
Disabled
support.
Enabled Enables Wake ON Ring
Disabled
support.
Choices or
Display Only Description
Disabled If enabled, the console will be
Serial Port 2 redirected to this port.
(3F8h/IRQ4) If console redirection is
Serial Port 2 enabled, this address must
(2F8h/IRQ3) match the settings of serial
port 2.
57.6K Enables the specified baud
19.2K rate.
No Flow Control Enables flow control.
XON/OFF
Direct Indicate whether the console is
Via Modem connected directly to the
system or a modem is used to
connect.
Your Setting
Your Setting
Your Setting