xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
NOTE: The Authenticator Diagnostics cannot be viewed on the Switch unless 802.1X is enabled by
port or by MAC address. To enable 802.1X, go to Security > 802.1X > 802.1X Global
Settings, and select Port-based or Mac-based from the Authentication Mode drop-down
menu.
Initialize Port(s)
Existing 802.1X port and MAC settings are displayed and can be configured using the window below.
To view this window, click Security > 802.1X > Initialize Port(s), as shown below.
If Port-based is selected in the Authentication Mode drop-down menu in 802.1X Global Settings window, the
following window appears.
Figure 8-17 Authenticator Diagnostics window
Figure 8-18 Initialize Port(s) - Port-based window
216