xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Queue Bandwidth Control Settings
To view this window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as shown below.
To view the following window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as show below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
From Queue / To Queue
Min Rate
Max Rate
Click the Apply button to accept the changes made.
NOTE: The minimum granularity of queue bandwidth control is 64Kbit/sec. The system will adjust the
number to the multiple of 64 automatically.
Figure 6-5 Queue Bandwidth Control Settings window
Description
Select the unit you want to configure.
Use the drop-down menu to select the port range to use for this configuration.
Use the drop-down menu to select the queue range to use for this configuration.
Specify the packet limit, in Kbps that the ports are allowed to receive. Tick the No limit
check box to have unlimited rate of packets received by the specified queue.
Enter the maximum rate for the queue. For no limit select the No Limit option.
144