Reboot System - D-Link xStack Reference Manual

xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Reset
Reset Config
Reset System
Click the Apply button to initiate the Reset action.

Reboot System

The following window is used to restart the Switch.
Selecting the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before
restarting the Switch.
Selecting the No radio button instructs the Switch not to save the current configuration before restarting the Switch. All
of the configuration information entered from the last time Save Changes was executed will be lost.
Click the Reboot button to restart the Switch.
Description
Selecting this option will factory reset the Switch but not the IP Address, User Accounts
and the Banner.
Selecting this option will factory reset the Switch but not perform a Reboot.
Selecting this option will factory reset the Switch and perform a Reboot.
Figure 12-20 Reboot System Window
Figure 12-21 System Rebooting window
313