Pvid Auto Assign Settings; Voice Vlan - D-Link DGS-3000 series Reference Manual

Layer 2 managed gigabit switch web ui reference guide
Hide thumbs Also See for DGS-3000 series:
Table of Contents

Advertisement

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide

PVID Auto Assign Settings

Users can enable or disable PVID Auto Assign Status. The default setting is enabled.
To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as show below:
Click the Apply button to accept the changes made.

Voice VLAN

Voice VLAN Global Settings
Voice VLAN is a VLAN used to carry voice traffic from IP phone. Because the sound quality of an IP phone call will
be deteriorated if the data is unevenly sent, the quality of service (QoS) for voice traffic shall be configured to
ensure the transmission priority of voice packet is higher than normal traffic.
The switches determine whether a received packet is a voice packet by checking its source MAC address. If the
source MAC addresses of packets comply with the organizationally unique identifier (OUI) addresses configured by
the system, the packets are determined as voice packets and transmitted in voice VLAN.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Global Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Voice VLAN State
Voice VLAN Name
Voice VID (1-4094)
Priority
Aging Time (1-65535)
Figure 4-15 PVID Auto Assign Settings window
Figure 4-16 Voice VLAN Global Settings window
Description
The state of the voice VLAN.
The name of the voice VLAN.
The VLAN ID of the voice VLAN.
The priority of the voice VLAN, the range is 0 – 7. The default priority is 5.
The aging time to set, the range is 1 – 65535 minutes. The default value is 720
minutes. The aging time is used to remove a port from voice VLAN if the port is an
automatic VLAN member. When the last voice device stops sending traffic and the
MAC address of this voice device is aged out, the voice VLAN aging timer will be
started. The port will be removed from the voice VLAN after expiration of voice VLAN
aging timer. If the voice traffic resumes during the aging time, the aging timer will be
70

Advertisement

Table of Contents
loading

Table of Contents