Radius; Authentication Radius Server Settings - D-Link xStack Reference Manual
Web ui reference guide dgs-3120 series layer 2 managed stackable gigabit switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
RADIUS
Authentication RADIUS Server Settings
The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To view this window, click Security > RADIUS > Authentication RADIUS Server Settings as shown below:
Figure 8-21 Authentication RADIUS Server Settings window (SI Mode Only)
Figure 8-22 Authentication RADIUS Server Settings window (EI Mode Only)
The fields that can be configured are described below:
Parameter
Index
Server IP (SI Mode Only)
IPv4 Address (EI Mode Only)
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select the IPv4
Address.
Set the RADIUS server IP address.
Set the RADIUS server IP address.
218
Advertisement
Table of Contents
