Ssh User Authentication List - D-Link xStack Reference Manual

xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
Twofish128
Twofish192
Twofish256
Click the Apply button to accept the changes made.
The fields that can be configured for the Data Integrity Algorithm are described below:
Parameter
HMAC-SHA1
HMAC-MD5
Click the Apply button to accept the changes made.
The fields that can be configured for the Public Key Algorithm are described below:
Parameter
HMAC-RSA
HMAC-DSA
Click the Apply button to accept the changes made.

SSH User Authentication List

Users can configure parameters for users attempting to access the Switch through SSH. In the window above, the
User Account "username" has been previously set using the User Accounts window in the Configuration folder. A
User Account MUST be set in order to set the parameters for the SSH user.
To view this window, click Security > SSH > SSH User Authentication List as shown below:
The fields that can be configured are described below:
Parameter
User Name
Authentication Method
Use the check box to enable or disable the twofish128 encryption algorithm. The
default is enabled.
Use the check box to enable or disable the twofish192 encryption algorithm. The
default is enabled.
Use the check box to enable or disable the twofish256 encryption algorithm. The
default is enabled.
Description
Use the check box to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Secure Hash algorithm. The default is enabled.
Use the check box to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the MD5 Message Digest encryption algorithm. The default
is enabled.
Description
Use the check box to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the RSA encryption algorithm. The default is enabled.
Use the check box to enable or disable the HMAC (Hash for Message Authentication
Code) mechanism utilizing the Digital Signature Algorithm (DSA) encryption. The
default is enabled.
Figure 8-68 SSH User Authentication List window
Description
A name of no more than 15 characters to identify the SSH user. This User Name must
be a previously configured user account on the Switch.
The administrator may choose one of the following to set the authorization for users
attempting to access the Switch.
Host Based – This parameter should be chosen if the administrator wishes to use a
264