DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Secondary VLAN Name
Secondary VLAN List
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
Click the
View Private VLAN List
PVID Auto Assign Settings
Users can enable or disable PVID Auto Assign Status. The default setting is enabled.
To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as show below:
Click the Apply button to accept the changes made.
Voice VLAN
Voice VLAN Global Settings
Voice VLAN is a VLAN used to carry voice traffic from IP phone. Because the sound quality of an IP phone call will
be deteriorated if the data is unevenly sent, the quality of service (QoS) for voice traffic shall be configured to
ensure the transmission priority of voice packet is higher than normal traffic.
The switches determine whether a received packet is a voice packet by checking its source MAC address. If the
source MAC addresses of packets comply with the organizationally unique identifier (OUI) addresses configured by
the system, the packets are determined as voice packets and transmitted in voice VLAN.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Global Settings, as show
below:
The fields that can be configured are described below:
Parameter
Voice VLAN State
Community.
Enter a secondary VLAN name.
Enter a list of secondary VLAN ID.
link to view all the private VLAN.
Figure 7-16 PVID Auto Assign Settings window
Figure 7-17 Voice VLAN Global Settings window
Description
The state of the voice VLAN.
65