xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
SNMP Traps Settings
Users can enable and disable the SNMP trap support function of the switch and SNMP authentication failure trap
support, respectively.
To view the following window, click Management > SNMP Settings > SNMP Traps Settings, as show below:
The fields that can be configured are described below:
Parameter
SNMP Traps
SNMP Authentication Trap
Linkchange Traps
Coldstart Traps
Warmstart Traps
Click the Apply button to accept the changes made.
SNMP Linkchange Traps Settings
On this page the user can configure the SNMP link change trap settings.
To view the following window, click Management > SNMP Settings > SNMP Linkchange Traps Settings, as show
below:
Figure 3-34 SNMP Traps Settings window
Description
Enable this option to use the SNMP Traps feature.
Enable this option to use the SNMP Authentication Traps feature.
Enable this option to use the SNMP Link Change Traps feature.
Enable this option to use the SNMP Cold Start Traps feature.
Enable this option to use the SNMP Warm Start Traps feature.
49