Authenticator Statistics - D-Link xStack Reference Manual

xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Unit Select the unit to be displayed.
Port
Select a port to be displayed.
Click the Find button to locate a specific entry based on the information entered.
Click the Refresh button to refresh the display table so that new entries will appear.
NOTE: The Authenticator State cannot be viewed on the Switch unless 802.1X is enabled by port or
by MAC address. To enable 802.1X, go to Security > 802.1X > 802.1X Global Settings, and
select Port-based or Mac-based from the Authentication Mode drop-down menu.

Authenticator Statistics

This table contains the statistics objects for the Authenticator PAE associated with each port. An entry appears in this
table for each port that supports the Authenticator function.
To view the Authenticator Statistics, click Security > 802.1X > Authenticator Statistics, as shown below:
Figure 8-14 Authenticator State window
213