D-Link xStack Reference Manual page 272

xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
Figure 8-67 SSH Authentication Method and Algorithm Settings window
The fields that can be configured for SSH Authentication Mode are described below:
Parameter
Password
Public Key
Host-based
Click the Apply button to accept the changes made.
The fields that can be configured for the Encryption Algorithm are described below:
Parameter
3DES-CBC
Blow-fish CBC
AES128-CBC
AES192-CBC
AES256-CBC
ARC4
Cast128-CBC
Description
This may be enabled or disabled to choose if the administrator wishes to use a locally
configured password for authentication on the Switch. This parameter is enabled by
default.
This may be enabled or disabled to choose if the administrator wishes to use a public
key configuration set on a SSH server, for authentication. This parameter is enabled by
default.
This may be enabled or disabled to choose if the administrator wishes to use a host
computer for authentication. This parameter is intended for Linux users requiring SSH
authentication techniques and the host computer is running the Linux operating system
with a SSH program previously installed. This parameter is enabled by default.
Description
Use the check box to enable or disable the Triple Data Encryption Standard encryption
algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Blowfish encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES128
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Advanced Encryption Standard AES-256
encryption algorithm with Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the Arcfour encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the Cast128 encryption algorithm with Cipher
Block Chaining. The default is enabled.
263