Pvid Auto Assign Settings; Subnet Vlan - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Parameter
Secondary VLAN Type
Secondary VLAN Name
Secondary VLAN List
Click the Add button to add a new entry based on the information entered.
Click the View Private VLAN List

PVID Auto Assign Settings

This window is used to enable or disable PVID Auto Assign Status. The default setting is enabled.
To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as show below:
Click the Apply button to accept the changes made.

Subnet VLAN

Subnet VLAN Settings
A subnet VLAN entry is an IP subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is
received on a port, its source IP address will be used to match the subnet VLAN entries. If the source IP is in the
subnet of an entry, the packet will be classified to the VLAN defined for this subnet.
The user can configure the subnet VLAN parameters here.
To view the following window, click L2 Features > VLAN > Subnet VLAN > Subnet VLAN Settings, as show
below:
The fields that can be configured are described below:
Parameter
VLAN Name
Description
Use the drop-down menu to select secondary VLAN type between Isolated or
Community.
Enter a secondary VLAN name.
Enter a list of secondary VLAN ID.
link to view all the private VLAN.
Figure 4-16 PVID Auto Assign Settings window
Figure 4-17 Subnet VLAN Settings Window
Description
Enter a VLAN Name.
75