Voice Vlan Oui Settings; Voice Vlan Device - D-Link xStack Reference Manual

xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide

Voice VLAN OUI Settings

This page is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the voice traffic. There
are a number of pre-defined OUIs. The user can further define the user-defined OUIs if needed. The user-defined OUI
cannot be the same as the pre-defined OUI.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI Settings, as show below:
The fields that can be configured are described below:
Parameter
OUI Address
Mask
Description
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.

Voice VLAN Device

This page is used to show voice devices that are connected to the ports. The start time is the time when the device is
detected on this port, the activate time is the latest time saw the device sending the traffic.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Device, as show below:
Figure 4-19 Voice VLAN OUI Settings window
Description
User defined OUI MAC address.
User defined OUI MAC address mask.
The description for the user defined OUI.
Figure 4-20 Voice VLAN Device window
76