Adding A Cpu Ipv4 Acl Profile - D-Link xStack Reference Manual
Web ui reference guide dgs-3120 series layer 2 managed stackable gigabit switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
xStack® DGS-3120 Series Layer 2 Stackable Managed Switch Web UI Reference Guide
Click the Show All Rules button to navigate back to the CPU Access Rule List.
Adding a CPU IPv4 ACL Profile
The window shown below is the Add CPU ACL Profile window for IP (IPv4). To use specific filtering masks in this ACL
profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add CPU ACL Profile button, the following page will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-5)
Figure 7-28 CPU Access Rule Detail Information (Ethernet ACL)
Figure 7-29 Add CPU ACL Profile (IPv4 ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1 to 5.
176
Advertisement
Table of Contents
