Create A New Ils File; Edit An Existing Ils File; Enable Automatic Ils Adjustment On A Channel - Christie CP42LH User Manual

1. Tap Menu > Advanced Setup > TCGD File Setup.
2. Select a TCGD file in the Current Target (TCGD) File list.
3. Modify the TCGD file settings.
4. Tap Save.

Create a new ILS file

1. Tap Menu > Advanced Setup > ILS File Setup
The ILS File Setup window is not available if the Enable Automatic ILS option is not selected
on the Lens Setup window. See
2. Tap Save As.
3. In the Filename field, type a name for the ILS file.
4. Tap OK.
5. To adjust the focus of the image on the screen, in the Focus area, tap the left or right icons.
6. To adjust the image focus, in the Zoom area, tap the positive or negative icons.
7. To move the position of the image on the screen, in the Offset area, tap the forward, backward,
left, or right arrow icons.
8. Tap Save.

Edit an existing ILS file

Changes made to an Intelligent Lens System (ILS) file are applied to all channels to which the ILS
file has been applied.
1. Tap Menu > Advanced Setup > ILS File Setup.
2. Select an ILS file in the Current ILS File list.
3. To adjust the focus of the image on the screen, in the Focus area, tap the left or right icons.
4. To adjust the image focus, in the Zoom area, tap the positive or negative icons.
5. To move the position of the image on the screen, in the Offset area, tap the forward, backward,
left, or right arrow icons.
6. Tap Save.

Enable automatic ILS adjustment on a channel

1. On the main screen of the TPC, in the Preferred Channels pane, tap a channel.
2. Tap Lens Adjust.
3. Select Enable Automatic ILS.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
Enable automatic ILS on a lens
Manage Projector Setting Files
on page 43.
41