Configure The Optional Uninterrupted Power Supply; Connect Sources And Turn The Projector On - Christie D4K25 User Manual

2.16 Configure the Optional Uninterrupted Power Supply

A UPS allows the projector head electronics to remain operable during a power failure.
Unplug the LVPS input connection from Main Power and connect it to the UPS input plug. Re-use the dummy
plug from the UPS connection with the unused Main Power plug.

2.17 Connect Sources and Turn the Projector On

1. Assign the projector a unique IP address and enter a baud rate:
• Tap Menu > Administrator Setup > Communications Configuration.
• Enter the IP address for the projector in the IP Address field.
• Select a baud rate for the input device in the Serial Speed (Baud) list.
2. Enter lamp information:
• Tap Menu > Advanced Setup > Lamp History.
• Tap Add Lamp.
• Complete the fields in the Add Lamp dialog.
• Tap Save.
3. Tap and hold the green power button to turn the projector on.
4. Complete a LampLOC™ alignment on the new lamp:
• Tap Menu > Advanced Setup > LampLOC™ Setup.
• Tap Do Auto.
5. Complete an optical alignment to optimize images displayed on screen. See
Alignment.
6. Adjust optical components if required.
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
Figure 2-16
Section 2: Installation and Setup
Section 4.3 Basic Image
2-17