Table of Contents
Advertisement
3.1
Connect a Computer or Server
To communicate with the projector from a computer, server or an existing network, connect the equipment to
the Ethernet hub or switch.
For applications or equipment utilizing serial communications, use the Christie-proprietary serial protocol to
connect to the RS232 PIB3G port on the PIB3G. When using Christie serial protocol over Ethernet connect to
port 5000. NOTICE: The RS232 PIB3G port located on the PIB3G faceplate utilizes Christie-proprietary
protocol and is intended for Christie accessories or automation controllers only.
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
Figure 3-3 Connecting Communications
Section 3: Connect Devices to the Projector
3-3
Advertisement
Table of Contents
