Service Setup: File Management Window; Digital Convergence Window - Christie D4K25 User Manual

Section 6: Projector Menus

6.16.1 Service Setup: File Management Window

Use the File Management window to manage backups and restore system settings. Tap Menu > Service Setup
> File Management.
Table 6.34 Service Setup: File Management Window
Region
1: Backup
2: Restore
3: Factory
Defaults
1. Tap Menu > Service Setup > File Management
2. to the location of the backup file.
3. Select the backup file and click Open.In the Select restore type list, select a file type.
4. Tap Restore.

6.16.2 Digital Convergence Window

Use the Digital Convergence window to adjust the red, green, and blue digital micromirror devices (DMD)
electronically. The maximum adjustment you can make is 3 pixels. When you complete a electronic
micromirror adjustment, 1 to 3 pixels are removed from the image.
Do not perform a digital convergence until you manually adjust and set the DMDs. Reset the red, green, and
blue DMD values to their default setting before you manually adjust the DMDs.
6-46
3
Figure 6-39 Service Setup: File Management Window
Description
Backs up configuration, preference, channel, and user data to a USB drive or an FTP site.
Restores backup data.
Resets all information on the projector to the factory default.
1
2
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)