Connect The Cinema Projector To An Optional Uninterrupted Power Supply - Christie CP2230 User Manual

connectors are controlled with the power connector breaker. For more information, see the Interconnect
Drawing provided with your cinema projector.
6. Turn the LPS Breaker ON.
7. If you are using the extraction unit and cinema projector power connectors, turn them on.
8. Connect the AC from the site to the socket located on the front bezel of the cinema projector.
2.14 Connect the Cinema Projector to an Optional Uninterrupted Power
Supply
A UPS allows the cinema projector head electronics to remain operable during a power failure.
Unplug the LVPS from main power and connect it to the UPS input socket. Connect the UPS to the main
power socket.
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)
to extractor
(optional)
CP2230 Projector &
Extraction Unit Power
Connectors
Connect to AC at site
Communication
cables
Connect to AC at site
Communication
cables
Lamp leads
to projector
Connect to AC at site with owner supplied line cord
200-240VAC (as indicated on licence label)
Lamp leads
Figure 2-1
Installation and Setup
2-15