Table of Contents
Advertisement
Section 6: Projector Menus
6.6
Alarm Window
When an alarm occurs, an Alarms window with a red border appears with a description of the alarm condition,
state, and time and date of the alarm. The window only displays alarms you have not previously acknowledged.
To acknowledge an alarm and remove it from the Alarms window, click Acknowledge. To view all alarms, tap
Menu > Status > All Alarms in the left pane.
6.7
Interrogator Window
To open the Interrogator window you need Operator, Administrator, or Service permissions. Tap Menu >
Diagnostics > Interrogator.
When you run the interrogator, you cannot modify projector settings. Image disruption can occur if you run the
interrogator during a show. If a failure occurs, run the interrogator to capture valuable diagnostic information
before you correct the issue or restart the projector.
Use the Interrogator window to retrieve log files and current configuration information in a single file. Select
Basic Mode to return log files, or select Enhanced Mode to return log files and registered batch files. Select
Download to USB to copy the log and batch files to a USB drive.
http://www.7-zip.org.
6-10
Figure 6-4 Alarm Window
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
Advertisement
Table of Contents
