Service Setup: Lamp Power Supply; About Window - Christie D4K25 User Manual

6.16.4 Service Setup: Lamp Power Supply

You need Service permission to access the Lamp Power Supply Setup window. Use the Lamp Power Supply
Setup window to specify the length of the cable used to connect the projector to an external power supply.
Tap Menu > Service Setup > Lamp Power Supply Setup

6.17 About Window

Use the About window to view information about the projector including the serial number, the current
software version, the Digital Light Processing (DLP) version, the lens and lamp type. If the projector has been
upgraded, a U appears at the end of the model number
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
Service Setup:
Figure 6-41 Lamp Power Supply
Section 6: Projector Menus
6-49