Source File Setup Window; Screen File Setup Window - Christie D4K25 User Manual

6.14.6 Source File Setup Window

1. Use the Source File Setup window to create source files that store resolution, offset, and aspect ratio
settings for input devices Tap Menu > Advanced Setup > Source File Setup.
Table 6.20 Advanced Setup: Source File Setup Window
Control
1: Resolution
2: Offset
3: Aspect Ratio

6.14.7 Screen File Setup Window

Use the Screen File Setup window to define the display panel size and how you want the image cropped. You can save
your settings, and apply them to other input devices.
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
1
3
Figure 6-22 Advanced Setup: Source File Setup Window
Description
The X and Y resolution of the incoming signal. For example, 2048 (X) and 858 (Y) or 1920 (X) and
1080 (Y). The resolution must match the incoming signal format. Tap once to increase or decrease
the resolution by a single increment. Tap and hold a button to increase or decrease the resolution by
multiple increments.
The amount of incoming data to discard. Set the values to zero to process all incoming data. Tap
once to increase or decrease the offset by a single increment. Press and hold a button to increase or
decrease the offset by multiple increments. The allowable X range is -4096 to 4096 pixels and Y
range of -2160 to 2160 pixels.
The aspect ratio for the incoming signal. The allowable range is 0 to 7.99.
2
Tap Menu > Advanced Setup > Screen File Setup.
Section 6: Projector Menus
6-29