Section 2: Installation and Setup
8. Connect the AC from the site to the socket located on the front bezel of the cinema projector.
Connect to AC at site
2.15 Configure the Optional Uninterrupted Power Supply
A UPS allows the cinema projector electronics to remain operable during a power failure.
It is recommended that you install a 200-240VAC UPS in-line between the LPS and the cinema projector. To
connect the cinema projector to a UPS, unplug the LVPS input from the main power and then connect it to the
UPS input socket.
WARNING
2-18
Communication
cables
Do not connect a UPS directly to the cinema projector UPS input.
Connect to AC at site with owner supplied line cord
200-240VAC (as indicated on licence label)
Lamp leads
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)