Table of Contents
Advertisement
Section 6: Projector Menus
6.15.6 GPIO Setup Window
Use the GPIO Setup window to configure the input and output settings of the GPIO interface. To open the
GPIO Setup window you need Administrator or Service permissions. Tap Menu > Administrator Setup >
GPIO Setup.
Table 6.30 Administrator Setup: GPIO Setup Window
Control
Rising Edge
Falling Edge
Trigger
Output
6-40
1
Figure 6-33 Administrator Setup: GPIO Setup Window
Description
The rising edge for the signal.
The falling edge for the signal.
The trigger that is sent when the function is activated.
The output that triggers the GPIO signal.
2
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
Advertisement
Table of Contents
