Communications Configuration Window - Christie D4K25 User Manual

Section 6: Projector Menus

6.15.5 Communications Configuration Window

The Communications Configuration window configures the Ethernet settings, serial communication
parameters, SNMP settings, and remote access settings.
Figure 6-31 Administrator Setup: Communications Configuration Window
Table 6.29 Administrator Setup: Communications Configuration Window
Control
1: Device Name
IP Address
Subnet Mask
Gateway
Apply
Serial Speed (Baud)
Enable SNMP
SNMP V2 / SNMP
V3
Management IP
Download MIB to
USB
Apply
Serial Access
Ethernet Access
6-38
1
2
4
Description
The name of the network device.
The IP address of the network device.
The subnet mask to which the address belongs.
The IP address for the network gateway.
Applies Ethernet settings.
The baud rate of the serial port. The default is 115200.
Enables SNMP.
The SNMP protocol type. Contact Christie for the SNMP V3 user ID and password.
The IP address where SNMP information and notifications are sent.
Sends the SNMP Management Information Base (MIB) file to a USB drive.
Applies SNMP settings.
Grants access to serial connections.
Grants access to Ethernet connections.
3
5
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)