Lamploc™ Setup Window - Christie D4K25 User Manual

Add Lamp Window
Table 6.16 Advanced Setup: Add Lamp Window
Control
Type
Serial Number
Reason for Change
Lamp Expiry
Hours Used
6.14.3 LampLOC™ Setup Window
Use the LampLOC Setup window to reposition the projector bulb for optimized light output. Tap Menu >
Advanced Setup > LampLOC™ Setup
Click Do Auto to run LampLOC automatically. You must turn the lamp on before you run LampLOC. If you
turn the lamp off during LampLOC, the bulb returns to its former position. The douser is open and it is not
functional during a LampLOC adjustment. To keep the bulb optimized as it ages, run LampLOC once a month
D4K25 User Manual
020-100882-02 Rev. 1 (07-2012)
Figure 6-18 Advanced Setup: Add Lamp Window
Description
The lamp type.
The serial number of the new lamp. A serial number can be up to 32 alpha-numeric characters.
The reason you are installing the lamp.
The number of hours the lamp operates before it is replaced. For information about lamp expiry
hours for available lamps, see
The number of hours the lamp has operated.
Section 5.5.10 Lamp Expiry Hours
Section 6: Projector Menus
.
.
6-25