Connect The Cinema Projector To An Optional Uninterrupted Power Supply - Christie CP4230 Setup Manual

8. Connect the AC from the site to the socket located on the front bezel of the cinema projector.(Figure 2-24)
Connect to AC at site
2.16 Connect the cinema projector to an Optional Uninterrupted Power Sup-
ply
A UPS allows the cinema projector head electronics to remain operable during a power failure.
It is recommended that you install a 200-240VAC UPS in-line between the LPS and the cinema projector. To
connect the cinema projector to a UPS, unplug the LVPS input from the main power and then connect it to the
UPS input socket.
WARNING
CP4230 Setup Guide
020-100669-03 Rev. 1 (05-2014)
Communication
cables
Figure 2-24 Connection to AC
Do not connect a UPS directly to the cinema projector UPS input.
Figure 2-25 UPS Connections
Connect to AC at site with owner supplied line cord
200-240VAC (as indicated on licence label)
Lamp leads
Section 2: Installation and Setup
2-21