Table of Contents
Advertisement
4.12 Color Calibration
To ensure an accurate color display:
1. Measure the colors displayed on the screen from the center of the audience viewing location to determine
the Measured Color Gamut Data (MCGD) value.
2. On the Touch Pad Controller tap Menu > Advanced Setup > MCGD File Setup and enter the color
values in the x and y fields for the different colors.
3. Tap Save. The software automatically determines the Target Color Gamut Data (TCGD) value. The TCGD
value determines what corrections are needed to display the correct colors.
4.13 Electronic Screen Masking
You can use the masking tool to correct image edge blanking. The masking tool produces results that are
similar to filing the aperture plate in a film projector. After you create the Flat and Scope screen files you can
use them in multiple channels.Hardware Setup
Use an infrared emitter to control gating in active glasses, a polarizing Z-screen (Pi-cell) with passive glasses
or filter wheel with passive glasses.
D4K25 User Manual
020-100882-02 Rev.1 (7-2012)
Section 1: Introduction
4-7
Advertisement
Table of Contents
