Removing The Processor Air Dam - Gateway 9515 User Manual

3
Lift the processor air duct from the chassis.

Removing the processor air dam

If you are adding a second processor to a single processor system, you need to remove the
air dam located on the underside of the processor air duct.
Caution
To remove the processor air dam:
1
Follow the instructions in
sure you turn off the server, then unplug the power cord and all other cables connected
to the server.
2
Follow the instructions in
3
Follow the instructions in
48
If you add a second processor to your server, you must remove the
processor air dam or the processor may overheat, causing possible
data loss and damage to the processor.
"Preventing static electricity discharge" on page
"Opening the server case" on page
"Removing the processor air duct" on page
www.gateway.com
43. Make
44.
47.