Gateway 9515 User Manual page 141

9515 server
Table of Contents

Advertisement

Check
Diagnostic LED decoder
point
G=Green, R=Red, O=Orange
D6
R
O
D7
R
O
D8
O
R
D9
O
R
DA
O
R
E1-E8
-
-
EC-EE
Bootblock recovery code checkpoints
The bootblock recovery code gets control when the BIOS determines that a BIOS recovery
needs to occur because the user has forced the update or the BIOS checksum is corrupt.
The following table provides the diagnostic LED codes for these checkpoints and describes
the type of checkpoints that may occur during the Bootblock recovery portion of the BIOS:
Check
Diagnostic LED decoder
point
G=Green, R=Red, O=Orange
E0
R
R
E9
O
R
EA
O
R
EB
O
R
136
Description
G
R
Both key sequence and OEM-specific method is checked to
determine if BIOS recovery is forced. Main BIOS checksum is
tested. If BIOS recovery is necessary, control flows to checkpoint
E0. See Bootblock Recovery Code Checkpoints section of
document for more information.
G
O
Restore CPUID value back into register. The Bootblock-Runtime
interface module is moved to system memory and control is given
to it. Determine whether to execute serial flash.
Off
R
The Runtime module is uncompressed into memory. CPUID
information is stored in memory.
Off
O
Store the Uncompressed pointer for future use in PMM. Copying
Main BIOS into memory. Leaves all RAM below 1 MB
Read-Write, including E000 and F000 shadow areas, but closing
SMRAM.
G
R
Restore CPUID value back into register. Give control to BIOS
POST (ExecutePOSTKernel). See
page 132
-
-
OEM memory detection/configuration error. This range is
reserved for chipset vendors and system manufacturers. The
error associated with this value may be different from one
platform to the next.
Description
R
Off
Initialize the floppy controller in the super I/O. Some interrupt
vectors are initialized. DMA controller is initialized. 8259 interrupt
controller is initialized. L1 cache is enabled.
R
G
Set up floppy controller and data. Attempt to read from floppy.
O
Off
Enable ATAPI hardware. Attempt to read from ARMD and ATAPI
CDROM.
O
G
Disable ATAPI hardware. Jump back to checkpoint E9.
www.gateway.com
for more information.
"POST code checkpoints" on

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents