Chapter 4: Installing Components
Replacing the processor
Your server is compatible with the Intel
processor. The server automatically detects the processor each time you turn
on the server. Whenever you install a new processor, you should first install
the most current version of the BIOS. For more information, see
BIOS" on page
Warning
Warning
To replace the processor:
1
Install the most current BIOS version. For more information, see
the BIOS" on page
2
Follow the instructions in
page
3
Follow the instructions in
42
57.
A heat sink must be installed on the processor. Installing
a processor without a heat sink could damage the
processor.
The processor and heat sink may be hot if the computer
has been running. Also, there may be sharp edges on the
heat sink. Consider wearing protective gloves.
57.
25.
www.gateway.com
®
®
Pentium
"Preventing static electricity discharge" on
"Opening the server case" on page
®
®
4 or Intel
Celeron
"Updating the
"Updating
26.