Gateway 9515 User Manual page 43

4
Move the shorting block from pins 2-3 to pins 1-2 on the Boot Block Update jumper
(J1B1) on the IMM module.
Important
5
Replace the PCI riser assembly.
6
Follow the instructions in
power cord.
7
Create a DOS-bootable USB Disk-on-key device or DOS-bootable CD.
8
Download the BMC update file from support.gateway.com.
9
Follow the instructions included with the update file.
10
Turn off the server, then disconnect the power cord and wait for the Standby power
LED to turn off.
11
Follow the instructions in
38
Jumper J1B1 is located on the IMM Module board.
Jumper J1B1 on the IMM
Module board
"Closing the server case" on page
"Opening the server case" on page
www.gateway.com
46, then reconnect the
44.