Gateway 9515 User Manual page 107

11
Holding the new backplane by the edges only, slide the backplane into place in the
chassis until the pins at the right and left sides of the backplane bracket are fully
inserted into the matching holes in the right and left guides in the chassis.
Caution
Caution
12
Connect the flex cable, the 2×3 power cable, and the front panel cable to the
backplane.
13
Follow the instructions in
14
Follow the instructions in
15
Reinstall the drives back into the server. Make sure that you install the drives into
the same bays you removed them from in
diskette in a converted hard drive bay" on page
on page 61, and
16
Replace the bezel by snapping it into place on the front of the server.
17
Follow the instructions in
102
Pressing or pulling on any components on the backplane could result
in damage to the backplane.
Make sure you do not pinch, bind, or damage any cables as you install
the backplane.
Left guide
"Installing the air baffles" on page
"Replacing the fan module" on page
"Installing a hard drive" on page
"Closing the server case" on page
Right guide
Step 4. For instructions see
56,
www.gateway.com
53.
85.
"Installing a CD or DVD drive"
64.
46.
"Installing a