Gateway 9515 User Manual page 83

3
Pull the plastic tabs away from the sides of the memory module slot. If you are
replacing a memory module, lift the old module out of the slot.
4
Align the notch on the new module with the notch in the memory module slot and
press the module firmly into the slot. The tabs on the sides of the memory slot should
secure the memory module automatically.
5
Follow the instructions in
6
Turn on the server and open the BIOS setup utility. Verify the
in the Main menu. When you exit the BIOS setup utility make sure that the operating
system completely loads. If you receive an error, see
7
Follow the instructions in
78
"Closing the server case" on page
"Updating the FRU/SDR" on page
www.gateway.com
46.
System Memory
"Memory" on page
39.
listed
142.