Replacing The Cmos Battery - Gateway 9515 User Manual

Replacing the CMOS battery

If the server clock does not keep time or the settings in the BIOS Setup utility are not saved
when you turn off the server, replace the CMOS battery with an equivalent battery.
Warning
To replace the battery:
1
Print the appendix for
2
Restart your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
3
Record the BIOS settings on your printout, then close the utility.
4
Turn off your server, then follow the instructions in
discharge" on page
5
Follow the instructions in
6
Remove the PCI riser assembly by following the instructions in
installing the PCI riser assembly" on page
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of or recycle used batteries by taking them to a hazardous
waste facility. Follow all local regulations for correct battery disposal.
BIOS Settings
43.
"Opening the server case" on page
www.gateway.com
in this guide.
"Preventing static electricity
79.
44.
"Removing and
103