Follow The Instructions In "Closing The Server Case" On Page - Gateway 9515 User Manual

To manually recover the BIOS:
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in
Caution
3
Remove the jumper across pins B1-B2, then place the jumper across pins B2-B3.
4
Follow the instructions in
5
Insert a bootable USB "disk-on-key" containing a valid BIOS image into a USB port.
6
Reconnect the power cords and turn on the server. The BIOS recovery is initiated.
While the BIOS is being recovered, the monitor displays a blue screen and the server
will beep continually. The process is complete when the server stops beeping.
7
Remove the bootable USB "disk-on-key."
"Opening the server case" on page
Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
"Closing the server case" on page
www.gateway.com
44.
46.
115