Gateway 9515 User Manual page 124

To clear the BIOS password(s):
1
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
2
Follow the instructions in
Caution
3
Remove the jumper across pins A1-A2, then place the jumper across pins A2-A3.
4
Follow the instructions in
5
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
7
Follow the instructions in
8
Place the jumper back onto pins A1-A2.
9
Follow the instructions in
"Opening the server case" on page
Moving the jumper while the power is on can damage your server.
Always turn off the server and unplug the power cords and all other
cables before changing the jumper.
"Closing the server case" on page
"Opening the server case" on page
"Closing the server case" on page
www.gateway.com
44.
46.
44.
46.
119