Gateway 9515 User Manual page 20

To mount your server in a cabinet:
1
Remove the two screws from each handle, then set the handles and screws aside.
2
Align the slots in a server rail with the studs on the side of the server, then engage
the slots with the studs and slide the rail back until it stops.
Mounting stud
3
Align the locking screw holes in the rails with the threaded screw holes in the server,
then install two locking screws through the each rail.
Locking screw hole
Server rail
Slot
www.gateway.com
Locking screw hole
Locking screw hotel
Slot
15