Removing The Server From A Cabinet - Gateway 9515 User Manual

Removing the server from a cabinet

To remove the server from a cabinet:
Caution
1
Remove the screws through the handles that hold the server in the cabinet.
2
While supporting the server, slide the server out from the cabinet until it stops.
3
Press the slide release latches on both sides of the server, then pull the server the rest
of the way out of the cabinet.
Screws are required to support the front of the server. You must
support the server while removing the front screws and while sliding
the server off the cabinet rails.
www.gateway.com 21