Gateway 9515 User Manual page 115

11
Lift the board away from the case.
12
Insert the new system board into the case, then slide the board toward the back of
the case so the board is held under the system board guides.
13
Replace the three system board screws you removed in
14
Follow the instructions in
15
Follow the instructions in
16
Follow the instructions in
17
Reinstall the PCI riser assembly by following the instructions in
installing the PCI riser assembly" on page
18
Follow the instructions in
19
Turn on your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
20
Check BIOS settings to make sure that they detect the server's new hardware, then
save your changes (if any) and close the BIOS Setup utility.
21
If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see
110
"Installing memory" on page
"Installing a processor" on page
"Replacing the fan module" on page
79.
"Closing the server case" on page
"Getting Help" on page
www.gateway.com
Step 9.
76.
88.
85.
"Removing and
46.
9.