Gateway 9515 User Manual page 64

12
Open the connector labeled "Floppy Con" on the backplane by pulling up on the
connector cover. See
connector.
13
Insert the other end of the diskette flat flex cable into the backplane connector, then
push in on the connector cover to lock the cable into place.
14
Reinstall the bezel, if required, by snapping it into place on the front of the chassis.
15
Follow the instructions in
16
Reconnect all power cords and peripheral device cables, then turn on the server.
"Hot-swap backplane" on page 8
"Closing the server case" on page
www.gateway.com
for the location of the
46.
59